It is necessary to pay attention to the method of operating the electric winch, otherwise it is easy to hurt yourself. Let’s take the trapping situation as an example to tell everyone about the specific operation method.
Wear protective gloves before starting operation to avoid injury. First connect the winch remote control cable, if it is no wireless remote control, you will not need it. Then open the clutch on the winch and use the remote control to release the cable. When pulling the rope, you must ensure that the cable is stored on the drum for more than 5 turns. Otherwise, when the load is heavy, the cable will be loosened from the drum.
If the trap is not deep, you can use the rescue vehicle as a fixed fulcrum and connect with the rescue vehicle; if the trap is very powerful, use rock or big tree as a fixed fulcrum to connect with the trap. If the trap is not deep, you can use the rescue vehicle as a fixed fulcrum and connect with the rescue vehicle; if the trap is very powerful, use rock or big tree as a fixed fulcrum to connect with the trap.
When the cable is connected, the winch clutch is closed and the remote control is used to control the drag until the vehicle is out of the trap and can drive normally. After use, remember to clean and maintain the electric winch, otherwise it will affect the service life.